LS150 Manual

LS100/10 Manual

LA010 Manual

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Accessory Decoders

LS-150 NMRA DCC
Switch Machine Decoder

Introducing the DIGITAL plus by Lenz LS150 turnout decoder, designed for cost effective turnout control for up to any combination of  6 Atlas, Bachman, Kato, LGB, Peco, Tortoise, or other popular brands of twin-coil snap action or motorized switch machines.

Specifications include:

*      For control of any combination of  6 Atlas, Bachman, Kato, LGB, Peco, Tortoise, or other popular brands of twin-coil snap action or motorized switch machines.

*      Support for 1024 accessory decoder addresses. Addresses for each output can be sequential or up to 6 independent addresses can be used

*      High current provision to support Peco and Atlas switch machines with short protection on each output.

*      Control using separate push-buttons is possible.

*      Configuring the LS150 does not require a separate programming track and the parameters can be changed at any time in the future even after installation.

 

 

LS-100 NMRA DCC
Switch Machine Decoder 


Controls 8 outputs (4 groups of 2): User Settable Address for group of 4 turnouts or signals. The time on duration for each group of outputs can be set independently. The LS-100 control 4 snap action switch machines or any other on/off device. The duration of time that the outputs are on are controllable. The LS100 contains feedback for each output.

To use the LS-100 to control bi-polar switch machines (Such as a Tortoise, Kato or LGB) an auxiliary output module is needed. The LA010 output module can be used for this purpose.